Shop Categories
- Underwater Camera Lenses
- Harnesses
- Imation
- Laser
- Telephones & Accessories
- Compaq
- Ceiva
- All Film Cameras
- Lenses & Filters
- Digital Camera Lenses
- Epson
- Handhelds & PDAs
- Carrying Cases & Bags
- 0-12"
- Wireless Headphones
- Floorstanding
- Special Bulbs
- Other
- Floppy Drives
- Printer Memory Modules
- Tablet PCs
- Brand Stores
- Fisheye
- Kick-Panel Enclosures
- Mounting Equipment
- Watches
- Home and Garden
- UK Electronics
- UK Books
- Health and Personal Care
- UK Sporting Goods
- Clothing, Shoes and Accessories
- Electronics, Gadgets and Computers
- CDs and Music Downloads
- UK Software and Video Games
- UK Toys and Games
- UK Home and Garden
- UK Video Games
- UK Baby Clothes and Accessories
- Books On
- German Electronics
-
-
Fotodiox Inc.
Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Dedicated lens hoods are designed to match the specific focal length of the lens it was designed for.
-
Canon Cameras US
One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles. Almost all EF and TS-E lenses have a Canon lens hood engineered specifically for it.
-
_VCC113
apKeeper is an elastic loop, which wraps around lens barrel of your camera, with lens cap leash. It prevents lens cap loss with adhesive-backed disc attached to the cap. CapKeeper2 is designed for SLR cameras with interchangeable lenses and video cameras A simple solution to a never ending problem. Where is the cameras cap? Don't worry about loosing a cap anymore. Try this affordable yet handy gadget on your camera today!! - Prevents lens cap loss - Adhesive-backed disc to attach to the cap - Works on camera's listed on title - Elastic loop to wrap around lens barrel - Check this video for clear instructions
-
Canon
E58U Snap on Lens Cap
-
Canon
E77U Snap On Lens Cap
-
Blue Crane Digital
-
Neewer
The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can be illuminated. The remote has a stylish and ergonomic design. This timer remote cord allows the camera shutter to be released from a distance and prevents the camera from shaking*Two-stage release button: Halfway pressing for auto-focus, complete pressing for taking pictures.
*Power source: Two AAA-type batteries (2XAAA Batteries not included)
*Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56 s, and an interval of 5 min.
Compatible with:
Canon (Replacement for RS-60E3) EOS Digital Rebel
Digital Rebel (aka 300D)
Rebel T1i (aka 500D)
Rebel XT (aka 350D)
Rebel XTi (aka 400D
Rebel XS (aka 1000D & Kiss F)
Rebel XSi (aka 450D & Kiss X2)
EOS Kiss/New Kiss/Kiss 7/Kiss III
Rebel 2000, Rebel G, Rebel G II, Rebel T1, Rebel T2, Rebel T2i
ELAN 7, ELAN 7E, ELAN 7N, ELAN II, ELAN IIE, IX LITE
PowerShot G10/G11
Pentax (Replacement for CS-205) K10D/K110D/K100D/K20D/K200D/KM
*ist D/DS/DS2/DL/DL2/K10
MZ-6, MZ-L, ZX-L
Hasselblad: H/H1/H2/H2D/H1D
Contax: 645/Nl/Nx/N/N Digital/LA-50
Samsung: GX-20 GX-10 GX-1L GX-1Specifications:
*Model: RS-60E3 Timer Remote Control Cord
*Length of cord: 91 cm (3 ft. approx.)
*Shutter release button: Dual Stage Button (halfway / complete)
Functions:
*Delay / Self Timer (DELAY)
*BULB/Long Exposure (LONG)
*Interval Timer (INTVL)
*Exposure Count (N)
-
Fotodiox
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters allow you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Certain prime lens just can't be replaced, and you save cost of purchase lenses. Fotodiox offers a range of adapter from large format to smaller format digital adapters. Adapting larger format lens, i.e., large format - medium format, medium format - 35mm, excellent edge-to-edge sharpness; and the smaller 24x36 mm image field helps minimize the effects of lens distortion and aberration.
-
Nikon
For 55-200mm Zoom Nikkor Lens, Lens hood Designed for the Nikon 55-200mm f4-5.6G ED AF-S DX Nikkor zoom lens Deflects oblique light angles that often cause flare effects Helps protect front of the lens scratches and dings while shooting
-
Dopo
It was made with highest precision out of highest quality solid plastic. The purpose of a lens cap is to keep dust, dirt, fingerprints, and moisture off your lens. The anti-missing cord is provided.Unique ergonomic snap on design allows it easy to use when the lens has hood, whether your hand are tender or coarse, it will take on or off easy when you using the hood, make your inspiration always on line.
-
Nikon
The FT1 Mount Adapter allows you to use certain legacy F Mount NIKKOR lenses (those designed for use with Nikon D-SLR/SLR cameras) on the Nikon 1 V1. The Mount Adapter is attached to the Nikon 1 V1 and the F Mount NIKKOR lens then attached to the adapter. The FT1 will add an angle of view of 2.7 times that of the F Mount NIKKOR lens' focal length.FEATURES: To use the FT-1, the Nikon 1 J1/V1 camera's firmware must be updated to at least version 1.10. F mount lenses mounted on the FT-1 have a crop factor of 2.7×. Enjoy an angle of view equivalent to that of a super telephoto lens when a telephoto lens is used. (Example: When using a 300mm lens, the equivalent angle of view is that of an 800mm lens.) When using the FT-1 and a compatible AF-S NIKKOR F-Mount lens, users can take full advantage of the Nikon 1's high-speed continuous shooting of 10/30/60 fps. (*When an AF-S lens is used. However, focus is locked with the first shot with continuous shooting.) [P], [S], [A], and [M] exposure modes can be used with CPU lenses. Vibration reduction (VR) functions when VR lenses are used. Enable vibration reduction, or specify a setting, using switches on the lens. NORMAL/ACTIVE modes are supported when lenses equipped with these modes are used. VR functions in NORMAL mode when lenses not equipped with the NORMAL/ACTIVE modes are used. The Smart Photo Selector function cannot be used. Supports 65 existing F-mount NIKKOR lenses AF/AE supported with AF-S lenses only. Autofocusing is possible when AF-S lenses are used. However, focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point with only the center focus point used. The focus indicator (rangefinder) can be used with CPU lenses. [A] and [M] exposure modes can be used with non-CPU lenses. Aperture is specifie
-
Michael Tapes Design
With more than 40,000 customers, the Genuine WhiBal has become the standard in the industry for precision WB Reference "Gray Cards". Each and every card is measured with a precision spectrophotometer to assure you that *your* card meets our industry leading specification of +/-0.5 within the a* and b* channels. Do not be fooled by RGB measurements (they have no meaning in this context). Very simply, WhiBal combines all the best features of all available White Balance cards, and meets or exceeds their technical performance in a unique package that can be used conveniently in all your shooting situations. In addition, WhiBal provides convenient neutral White and Black reference areas for setting dynamic range in your digital capture using the Black and White Eyedroppers available in RAW conversion software, PhotoshopTM, and most other editing software. Check out the educational videos on-line. (Search for WhiBal). They tell the entire story. Feature Summary: ? It fits in your shirt pocket.(2.1x3.35 inches)...so you will actually use it rather than have it in your bag! ? It is basically indestructible, waterproof, etc ? All 4 reference "colors" are essentially equal to or better than all tested "reference cards" for neutrality and spectral flatness. ? All cards are designed for low reflectivity, except the BlackPoint sticker which intentionally is highly reflective so that maximum Blackpoint level may be achieved. ? Larger are smaller sizes are available. ? Can be used to set white balance reference, Black point and White point. ? Fits shirt pocket or can hang on studio hook or lanyard. ? WhiBal is a product of PictureFlow LLC, is patent-pending and proudly made in the USA.
-
Fotodiox
This is one of the Pro-series lens mount adapter made with precision and pristine award standard. As all Pro-series adapters, these adapters have been specially crafted to endure professional lenses. No "play" between lens and Camera. With unique styling, the lens mount adapter maintains/enhances professional appearance. This lens mount adapter allows Nikon/Nikkor lens (F, non-AI, AI, AIS, AF, AFD) to fit on Canon EOS camera body. G-type lens will not be able to adjust aperture.
-
Canon Cameras US
Two Extension tubes, in the same 12mm and 25mm lengths as previously available, have been redesigned to accommodate the EF-S mount lenses and its extended rear elements. They're perfectly compatible with all previous EF and TS-E lenses, and will work with any EOS film or Digital SLR. Exposure compensation is often required with cameras other than the EOS-1 Series.
-
Sony
The world's first, Mount Adaptor with Translucent Mirror Technology provides fast and accurate AF for both stills and movies. Built-in AF motor allows AF with A-mount lenses.
-
Canon Cameras US
Canon Dust Cap E Rear Cap for EF / EF-S Lenses, Tele-Extenders, Extension Tubes.
-
Cosmos
This lens pouches are made of neoprene, the same material used to protect scuba divers from the harsh sea. This neoprene lens pouch is very soft and elastic, but durable to hold and protect your lens.
-
Fotodiox Inc.
Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Dedicated lens hoods are designed to match the specific focal length of the lens it was designed for.
-
PLR
The PLR filters continue the brand's long legacy of superior optical solutions. All our filters are carefully formulated to ensure consistent color and accuracy throughout the entire surface of the glass. Why? Consistent color means consistent high quality results. We know that a poorly made filter makes a great lens and camera worthless, that's why the our frame rings are constructed of special alloys that won't expand or contract over time or due to temperature extremes-it's also why we back our filters with an 10 year warranty-because we engineer them to last.
Like all optics, filters are precision manufactured to the most demanding of tolerances. This ensures consistent high quality results even after years of use.
-
Bower Camera
The Bower Lens Cap Keeper is a convenient, easy way to keep track of your lens cap. It has an elastic loop that fits the SLR lens barrel and has an adhesive button that attaches to the lens cap to free up both hands for any photographer. The cap remains connected while you shoot and can be easily reattached when finished snapping.